3800 Miss
 

Working on a 89' Bonnie w/3800
At first it had a miss around 50mph, then it was hard starting, then no start at all, so I replaced the coil pac and the wires(needed wires anyway) it starts good now but it has a miss all the time. I'm going to change the plugs tomarrow.

Does anyone have any input on this?
Steve

RE: 3800 Miss
 

I found the problem, replaced the plugs and still had a miss. Started to pull the wires off the coil pack and there was no change on number 6, changed the module and she runs good again.