hood Tach
#1
hood Tach
ISO wire pinout on the 3-cavity connector for hood Tach. The wire colors are too far gone. I have found two (of the three wires) of the wires are going to the back Light. and assume the third wire goes to the coil. What I don't know is the polarity of the GND & 12v wires. (which cavity is ground, which cavity is Ignition power). I know the incandescent bulb doesn't care, but I'm assuming the Tach module will. I don't want to hook up backwards and fry the Tach with the wrong polarity.
Any help would be appreciated. Thanks
Any help would be appreciated. Thanks
Thread
Thread Starter
Forum
Replies
Last Post